2019 Evinrude 150 HP C150FLH Outboard Motor
Engine
Engine Type: V6 66 deg. E-TEC D.I.
Bore x Stroke: 3.386 x 3.100 in. (86 x 79 mm)
Displacement: 167 cu.in. (2744cc) 2.7L
Starting: Electric
Dimensions
Shaft Length: 20 in. (508 mm)
Weight: 530 lb. (240 kg)
General
Trim Method: Power Trim & Tilt
Propshaft Horsepower: 150 hp
Full Throttle Operating Range: 5400-6000 rpm
Gear Ratio / ShiftL: 2.17:1
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 133 Amps Total / 50 net Dedicated / 14 amps @ idle
Steering: Integrated Hydraulic Steering / iSteer Dynamic Power Steering
Warranty: 5-Year Engine / 5-Year Corrosion
Features
- Any couple, no compromise:
E-TEC G2 is powerful with precision. Direct injection optimizes all elements of how fuel is delivered to the cylinders and eliminates burned fuel, creating the most efficient waterborne engine available today. By using advanced computer software designed to analyze this combustion, the Evinrude E-TEC G2 can achieve up to 30% higher torque.
Evinrude intelligent steering system:
All Evinrude E-TEC G2 engines have been designed to make sailing easy and intuitive. The Evinrude Smart Steering is a set of integrated engine features that give confidence to all paddlers, experienced or novice. water friendly. Fuel friendly. Friendly and family:
Run the cleanest outboard motor on the planet. The PurePower combustion of the Evinrude E-TEC G2 engine is so clean that its reportable emissions are lower than any other engine in its class. Not only clean but also lean. With fuel economy of up to 15 metres, no competitor can take you further with a single tank of fuel.
Specifications
- Engine Model: C150FLH
- Engine Type: V6 66° E-TEC D.I.
- Bore x Stroke – in (mm): 3.386 x 3.100 (86 x 79)
- Displacement – cu in (cc) L: 167 (2744) 2.7L
- Gear Ratio: 2.17:1
- Full Throttle RPM Range: 5400-6000 RPM
- Weight – lbs (kg): 530 (240)
- Starting: Electric
- Controls: iControl Digital Shift & Throttle
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 133 Amps Total / 50 net Dedicated / 14 amps @ idle
- Steering: Integrated Hydraulic Steering / iSteer Dynamic Power Steering
- Trim Method: Power Trim & Tilt
- Trim Range: -6° to 15°
- Tilt Range: 81°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): On-Engine 3 (11.4) / Accessory 1.8 (6.8), 3 (11.3) & 10 (37.85)
- Recommended Oil: Evinrude/ Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Warranty: 5-Year Engine** / 5-Year Corrosion
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
- Mounting Centers – in (mm): Minimum 26 (660)
- Color: Slate Gray with over 400 Color Panel Options
- Steering Angle: +/- 32°
- Integrated Features: Dual Axis Rigging / iTrim
Reviews
There are no reviews yet.