2019 Mercury 40 HP 40ELPTBT Outboard Motor

2019 Mercury 40 HP 40ELPTBT Outboard Motor

A compact, single-overhead-cam design and long piston stroke deliver more low-end torque for stout power, even when pushing a heavy load. For commercial fishing vessels, commercial workboats and law-enforcement boats.

Engineered for Commercial: Engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done, the 60 and 40hp SeaPro FourStroke engines are validated to three times the engine life of a recreational engine.

Command Thrust Gearcase: The 60 and 40hp SeaPro FourStroke engines come standard with the Command Thrust gearcase. Its larger torpedo, combined with a bigger-diameter prop, can lift a heavy boat onto plane more easily and hold it there at lower speeds without impacting top speed.

Corrosion Resistance: Mercury’s proprietary formula – XK360, is an extremely low copper content aluminium alloy, which leads the industry in corrosion resistance. This makes costly corrosion failures and high labour bills a thing of the past. Most competitors use alloys with 2% to 4% copper content which will corrode faster than our MercAlloy, XK360 or A356 alloys.

Repower with SeaPro: The compact size also means older boats not initially designed for the weight of heavier four-stroke outboards can now be repowered and reborn to perform at their best with the latest technology.

Engine type: 8-valve single overhead cam (SOHC); Inline 4

Displacement (CID/CC): 60.8 / 995

Air induction: Performance-Tuned Scroll Intake Manifold

Fuel induction system: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)

Alternator amp / Watt: 18 amp / 226 watt

Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum

Recommended oil: NMMA Certified FCW SAE 25W-40

Engine protection operator warning system: SmartCraft Engine Guardian

Starting: Electric (turn-key)

Controls: Mechanical throttle & shift

Steering: Big Tiller; Remote

Shaft length: 20" / 508 mm

Dry weight *Lightest model available: 260 lbs / 118 kg

Bore and stroke: 2.56 x 2.95" / 65 x 75 mm

Ignition: SmartCraft ECM 07 Digital Inductive

Cooling system: Water-cooled with thermostat

Gearcase options: Command Thrust (CT)

Trim system: Gas Assist available; Power Tilt; Power Trim

Exhaust system: Through prop

Lubrication system: Wet sump

Oil Capacity: 3.0 qts / 2.8 l

8-valve single overhead cam (SOHC); Inline 4

2.56 x 2.95 in. (65 x 75 mm)

Gas Assist available; Power Tilt; Power Trim